The RPS-9000 Programmer is designed to give you the ease and convenience of programming the memories and set menu options of your radio from your PC.

Memory Channels Include:

• 200 Memory Channels
• 2 Limit Memories (1 pair)
• 1 VFO Channel

Other Menu Item Categories Include:

• Common Settings 1
• Common Settings 2
• DTMF
• 2Tone

The Radio Programmer Is for so Much More than Just Memory Management.

The programming process begins by first installing the program. Drivers for the cable are installed during this process.

Next, connect the RT Systems programming cable and give the operating system a minute to complete driver setup.

Make the connection between the radio and the computer. Complete Communications | Get data from radio. This “syncs” the radio and computer. Even if the radio is not yet set up with memory channels, there are details that the programmer needs to get from the radio.

Start setting up details for your radio in a “factory fresh” file (File|New) or in the file that was created when you did Communications | Get data from the radio. Begin by entering a receive frequency (that will be the frequency published for the repeater). When you press Enter or Tab to leave the Receive frequency field, the program will complete details for the channel. Then customize Name and Tone to match the details you have for that local repeater.

Use the links to external data sources (File | External data) built right into the programmer to access repeater details for your area or for a location you plan to visit. Then with just a few button clicks, you have a file with hundreds of entries and all you typed was your location (i.e., zip code or city).

Save your file as you work. This is a computer, after all, and you would hate to lose your work should the system fail. Actually, create and save as many files as you want or need. You could have one file for home, a different one for the vacation house, another for the trip to your son’s house, another for the yearly 3K run and picnic where you help direct traffic and want the radio to be programmed with only the frequencies for that event. Remember, radio programming is an overwrite process. Everything in the radio is replaced by everything in the file.

Limit Memories

VFO

Common 1 and 2

Use these screens to customize other set menu features of the radio. Check boxes toggle features on or off, drop down menus list all selections and blank boxes for personalized entry add to the ease of setting up your radio exactly like you want it.

The entries on the Settings screens are made for you to "Set and Forget". Once settings are customized, you are prompted to save before exiting. The saved settings will be there every time you create a new frequency file.

The settings are not frequency dependent. One settings file can be used with any frequency file.

DTMF

Enter DTMF memory details and customize options for this function of the radio.

2Tone

Set up options for 2Tone Paging.

Data management is the key to getting everything you can from your radio. RT Systems Programmers give you many ways to manage and organize frequencies and settings to help you enjoy your radio and activities.

Remember, the program for your radio is specific to this radio model. While cables may work for many models, the programmer must be customized so the radio thinks it is talking to a "twin" of itself. Review Hardware Requirements here for details on operating systems and radio to computer connections.

RT Systems works to keep radio programming organized so everything works the first time and every time.

Visit the entire site for all the great RT Systems products, Knowledge Base articles, and How to Videos. You answers may be just a click away.