RPS-XS20G^ Programming Software Only for the Wouxun
KG-XS20G/20G Plus radios*

Remember: This radio programs through the 8-pin modular port under the data cover on the back of the radio. The radio is not designed to transfer programming details through the mic jack on the front or the speaker jack on the back. There are three tries here... only one will work.

• Cables with proper pin spacing for the radio have been around for a long time with varying designs for USB circuitry. some work well. Some work with varying degrees of success. Some don't work at all. Both circuitry design and wiring could be the issue. If you have a cable that works, it should work with the programmer.
• A generic cable may cease to work on Windows 11.
• When using a generic USB cable for programming, you are responsible for finding and installing drivers.
• You are responsible for identifying the com port in use by the cable, assigning that in the program and changing it should you use a different cable the next time that assigns to a different com port designation.
• RT Systems cannot help you with cable setup... there are just too many cables out there for us to begin to know what you have.

• Performance of the programming system is guaranteed only with the RT Systems USB-W5R cable.
• RT Systems programming cables work on Windows 11.
• Drivers are installed during installation of the programmer. Sometime help is needed to complete driver installation: we are here to help with that.
• You do not need to know or assign a com port in the program. The programmer finds the cable automatically.
• If there is a problem with communications between the radio and the computer, we are here to help....and we know LOTS of tricks!!