Knowledge Base:  

Knowledge Base : drivers
Page of 2
Problems with Driver Signature Enforcement on Windows 7 x64.
In some versions of Windows 7 x64, we have been experiencing issues with verifying the digital signature on our drivers for the RT Systems USB cables. This problem is an indication that you
Allowing Driver Installation on the Mac

Drivers for RT Systems Radio Programming Cables Installation on the Mac Allowing the process to complete in Security and Privacy
USB Driver Error - Code 39 {Bad Image} on Windows 10

The Spring Creators Update for Windows 10 has been known to cause an issue with the USB driver installation for RT Systems cables. If you have found you get a "Code 39" error as seen in the picture b
Mac OSX USB Cable Driver for RT Systems USB Cables
RT Systems Programming Cables Provided here are drivers for the RT Systems USB cables for use on the MAC. They are drivers for the machine to use to recognize the device. There is not software fro

Windows Drivers for the RT Systems USB cables


Installation of drivers for RT Systems USB cables. USB Drivers for RT Systems USB cables other than the original VX-8 cable. USB Drivers
IC-9100 USB Driver Setup

The IC-9100 has built in USB circuitry. A USB-A to USB-B cable can be used to connect the radio to the computer through the USB port on the back of the radio.. If the radio is connected while it
Updated drivers for Kantronics USB cable from Associated Radio
Associated radio makes a 25-pin to USB cable for use with the Kantronics TNC. Use the link to download and install the latest drivers for the electronics in the USB of the newer cables. Driver update
Yaesu USB Com Port Drivers
Download the drivers for the SCU-19 cable for the FT1D and the SCU-20 cable for the FTM-100 and FTM-400 distributed by Yaesu. Click on the link below on the link to download the executable
IC-7300 USB Driver Setup

The IC-7300 has built in USB circuitry. A USB-A to USB-B cable can be used to connect the radio to the computer through the USB port on the back of the radio.. If the radio is connected while it

Driver repair for the Kenwood TH-D74


UPDATE: Kenwood has released updated drivers which should resolve any further issues. Please find the new drivers and an installation guide at this link . If the drivers continue giving errors,
Silicon Labs Drivers
1) Many radios are now using Silicon Lab Drivers to communicate between the radio and the computer. Given how RT Systems programmers "find" the radio for you in the Communications | Get or Send data
Driver Installation on Windows 2000

USB Install on Windows 2000 C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBComDrivers\Drivers VX-8 Only - C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBDrivers\Drivers

Drivers for the RTS-03 USB to serial adapter


Installation of drivers for the New RTS-03 USB to Serial adapter shown below. Click on the link to install the drivers. Complete the process 2 times for complete installation. New RTS03 Driv
Error - Can't load Ftd2xx.dll - Error

1) Has the RT Systems USB cable been plugged in yet? If not, please attach the appropriate RT Systems USB cable for this programmer. Give Windows a little time to complete installation of the drivers
FT_W32_GetComMask - Error

Error with USB cable Customer reports error with USB cable when accessed in programmer. The error message is: "CommondataV4 Error: Can't Find FT_W32_GetCommMask" I get this error twice an
Install Disc 1 - error message at installation

The error message - " Install disc 1 " - occasionally happens when the program is installed. Most of the time, this means that it just had a problem with the drivers. The steps below will fix the pro
Cable communication problems in Ham Radio Deluxe

Error with USB cable Getting this cable to work with a radio and Ham Radio Deluxe can be a little tricky. Right now we only have the Yaesu FT-450 to work with. We bet others are similar. If unable
Cable Requirements

Step 1 - Install the software... Step 2 - Now attach A/B cable to radio/Power up radio - driver square should pop up - this will need some time to load everything - be patient & let it run.
Programming the FTM-400 via the SD Card
FTM-400 Data Transfer The ADMS-M400 Radio Programmer for the Yaesu FTM-400 Getting the initial details from the radio.
Quick Guide to Reading and Writing the FTM-400 Radio

Follow these exact steps from beginning to end to get data from or send data to the FTM-400 radio. You must get data from the radio before you can send data to the radio the first time. This gets bac