Knowledge Base:  

Knowledge Base : Programmed memory scan
Page of 1
Auto Step and Limit Memory Scanning

The Limit Memory channels that are PMS scanning setup in the FTM-400 offer a Step option. This option is used by the radio during scanning only if Auto Step is turned off. The default for Auto St
Memory Banks

To access the memory banks in the IC-2300 once they are programmed:  Press M-Call to access memory mode (at this point all your memory channels will be available when you turn the tuning k
Groups

Page 18 of the manual details Memory Channel Groups. Let me summarize here. The groups are predefined for the memory channels as shown in the first chart. Channels 0-49 are in Group 0, Channels 50-99
FTM-400 Out of Band Receive (AM, 174-400Mhz and 480-999.99MHz)

This is a common question for tech support on this radio and program. "Why are not all the channels that I programmed into memory available when it tune to them?" . Generally it it thought that th
Details about channels in Btech GMRSV1 Radio
The BTECH GMRS-V1 radio is interesting in its design. The first 22 memory channels are pre-programmed from the factory with GMRS simplex and repeater channels. These channels are presented on the GMR
How the Quad Band KG-UV980H radio handles frquencies.
The Wouxum KG-UV980H Quad Band radio handles frequencies differently on its right and left sides. The left side handles all of the bands (actually, there are more than four) listed on page
Weather channels included with scan

The scan on the radio includes both my programmed memory channels and the weather channels. I would like the weather channels to be excluded. Turn off Weather Alert to exclude the weather channels du