Knowledge Base:  
Knowledge Base > Yaesu > VX-7

Page of 1
Clock Set

Setting the clock on this radio is not done in the software, it can only be done manually, instructions are on page 69 in the manual. (There are too many variables to have this option in the software
Name Display

Name displays only if in single receive and small characters. To get into correct display:                  &nb
Radio Locked

If this radio is acting like it is locked - the mask function is operating, need to disable.
VX-7 Accessing Marine and Shortwave Pre-programmed Frequencies

The VX-7 comes pre-programmed with 89 popular Short-wave Broadcast Station Memory Channels and 280 VHF Marine Channels. When trying to access the BC Station or Marine channels you may get a beep wh
Error running Settings screen in VX-7 Programmer
When accessing the settings screens in the VX-7 programmer a fatal error is raised concerning a control that cannot be created. To eliminate this error, run the correction file from the link. 
VX-7 Name Display
Names are displayed on the VX-7 only when the radio is 1) in single receive AND 2) in small text. From the face of the radio once programmed 1) Press and hold Main until the radio toggles between sing