Knowledge Base:  
Knowledge Base > Cables

Page of 1
Cable wiring details

USB-RTS01 Shield (the connection closest to the rubber) = Ground Ring = Not Wired Tip = PTT USB-29A Shield (the connection closest to the rubber) = Ground Ring = Not Wired
Driver Installation on Windows 2000

USB Install on Windows 2000 C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBComDrivers\Drivers VX-8 Only - C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBDrivers\Drivers

The USB-RTS01 is a single radio interface that connects one Icom radio to a computer just as the CT-17 (Icom interface) connects five radios.  In other words, the electronics and the wiring offe

USB to 6-pin mini din for the Yaesu FT-840 Designed for CAT interface between the radio and the computer.  For use with control software available from other sources. 

USB to 8-pin mini din interface cable comparable to the original CT-62 (db-9 serial) CAT interface cable distributed by Yaesu.   This cable works with:  FT-100 FT-817 (original a
USB-63 Cable Signals

The USB-63 handles RTS/CTS signals however not DTR/DSR signals as these are two independent functions of serial protocol. This is in addition to Serial TX, Rx and Ground. The USB-63 cable is in essen

The USB-63 cable works with many Yaesu and Kenwood HF radios: specifically those with a 9-pin male CAT connection on the radio.   The USB-63 works with Yaesu FT-450 FT-920 FT-950 FT-10

USB-DB-9 MALE connection.    Same connections as USB-63 with MALE rather than female connection at the radio.  Works with TenTec models Jupiter 538 538CE 538AT Orion 565 56

USB to 9-pin female connection.  Cable is wired as null-modem with connections 2 and 3 in the db-9 reversed (twisted pair).   Cable works with: Yaesu     FT-847 Cable is
USB-70 and USB-72 Cables

In mid-2015, RT Systems released programming software and cables for a few new mobile radios. At the time, these mobile radios used our USB-72 cable as pictured below. It had the correct fitting plug
Windows Device Manager

If you are having problems with your RT Systems USB cable, it can be beneficial to open the Device Manager. This will allow you to determine if your computer properly 'sees' your cable. To open the D
Problems with Driver Signature Enforcement on Windows 7 x64.
In some versions of Windows 7 x64, we have been experiencing issues with verifying the digital signature on our drivers for the RT Systems USB cables. This problem is an indication that you
Updated drivers for Kantronics USB cable from Associated Radio
Associated radio makes a 25-pin to USB cable for use with the Kantronics TNC. Use the link to download and install the latest drivers for the electronics in the USB of the newer cables. Driver update