System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Knowledge Base > Icom
Choose a sub category:
D-Star IC-2000 IC-207
IC-2200 IC-2300 IC-2800
IC-2820 IC-7000 IC-706
IC-7100 IC-7300 IC-746
IC-756 Pro IC-80 IC-91
IC-9100 IC-92 IC-V8
IC-V80 IC-V82 ID-51
ID-5100 ID-800 ID-880

Page of 4
Banks - Accessing on the radio after programming

Once programming of the IC-92 is complete, power the radio off and back on to return to normal mode. Press [MR] repeatedly to enter memory bank mode.... this is the tricky part of the process. Y
Banks - Accessing on the radio after programming

Once programming of the IC-92 is complete, power the radio off and back on to return to normal mode. Press [MR] repeatedly to enter memory bank mode.... this is the tricky part of the process. Y
Buttons not working on radio

The IC-V8 and IC-V82, each have a channel number mode that not only displays Ch #, but renders many functions of the radio unaccessible from the radio's face.   In this mode, it will appear
Buttons not working on radio

The IC-V8 and IC-V82, each have a channel number mode that not only displays Ch #, but renders many functions of the radio unaccessible from the radio's face.   In this mode, it will appear
Cable Information

The USB-RTS01 plugs into the back of the radio, 2nd one from the heat sink. The USB-RTS01 can be used anytime the CT-17 is called for.
Cable Information

The USB-RTS01 plugs into the back of the radio, 2nd one from the heat sink. The USB-RTS01 can be used anytime the CT-17 is called for.
Cable Requirements

Step 1 - Install the software... Step 2 - Now attach A/B cable to radio/Power up radio - driver square should pop up - this will need some time to load everything - be patient & let it run.
Cable Requirements

Step 1 - Install the software... Step 2 - Now attach A/B cable to radio/Power up radio - driver square should pop up - this will need some time to load everything - be patient & let it run.
CI-V Baud Rate affects programming

The RT Systems programmer cannot talk to the ID-51 (in all its varieties) if the CI-V Baud Rate is set to 19200. We are working to change this in the program, but for now, please make sure the CI-V
Communication Timeout Error - IC-2820

If you are using the orange colored USB-RTS05 cable, this error may indicate that the radio's data port has been disabled. Plugging a cable into the radio's speaker jacks will disable the data port.
Control Cable

The RTS-01 works with the IC-706 for controlling the radio through Ham Radio Deluxe or other control software available from other sources.   The RTS-01 works in place of the CT-17 connecti
Control Cable

The RTS-01 works with the IC-706 for controlling the radio through Ham Radio Deluxe or other control software available from other sources.   The RTS-01 works in place of the CT-17 connecti
D-STAR Calculator not available

The D-Star calculator is only accessible in Band B Memories, Band B Limits or Band B VFO, when you are in one of these this feature will become active.
D-STAR Calculator not available

The D-Star calculator is only accessible in Band B Memories, Band B Limits or Band B VFO, when you are in one of these this feature will become active.
D-STAR Settings & Calculator grayed out

If these settings are grayed out or not accessible - are you in band A or B?   You will need to be in band B to activate these. Also, if you are in Band B and they are still not access
D-STAR Settings & Calculator grayed out

If these settings are grayed out or not accessible - are you in band A or B?   You will need to be in band B to activate these. Also, if you are in Band B and they are still not access
Data Transfer

This is the only radio, we make software for that they may transfer partial loads of data, ex - could select just band A, or just band B, etc.
Data Transfer

This is the only radio, we make software for that they may transfer partial loads of data, ex - could select just band A, or just band B, etc.
Details for IC-756

Radio is discontinued. Radio did not have programming abilities.  It is a big desktop HF rig.  Generally those have the ability to be controlled from the computer; but there is no acce
Details for IC-756

Radio is discontinued. Radio did not have programming abilities.  It is a big desktop HF rig.  Generally those have the ability to be controlled from the computer; but there is no acce