Knowledge Base:  
Name Display

Last Updated: 08/08/2013
According to the Icom manual and to Icom tech support, the only way the names are displayed on the radio is if the radio display is in List Mode.  

To enter List Mode: 
Press Menu down until you reach M-2
Press MEN
Press LST

The display of the radio will LIST the frequencies by channel number along with the names. 


 Now, something we discovered on this radio... while you are on the way to List Mode, you will see the names on the screen. 

Press Menu down until you reach M-2
Press MEN

The name will appear in a section of the screen on the radio at the bottom of the display. 
(This is probably more of the type of display most users are looking for).


Was this article helpful?

Comments:
 

Related Articles
 > Communications Error - IC-7000
 > Repeater Access Tones
 >

IC-2100 Narrow Band Operations


 >
Radio buttons not working

 >
No programmer for this radio

 >
Software and cable

 >
Memory Banks

 >
Software and Cables

 >
Software and Cables

 >
Dual Display

 >
Control Cable

 >
No programmer for this radio

 > Banks
 >
Cable Information

 >
Skip Channels

 >
Data Transfer

 >
Details for IC-756

 >
Port for Data/Programming Cable

 >
D-STAR Calculator not available

 >
Cable Requirements

 >
Banks - Accessing on the radio after programming

 >
D-STAR Settings & Calculator grayed out

 >
Buttons not working on radio

 >
Serial number mixup

 >
CI-V Baud Rate affects programming

 >
Repeater Operations on Icom IC-7600 radio

 > Icom IC-R10 Receiver Speaker/Mic Jack