Knowledge Base:  
Name Display

Last Updated: 08/08/2013
Name display on the radio can be controlled two ways: 

The programmer sets Show Name to On for all Programmable Memories.  If a name is entered, it will be displayed.  If no name is entered, the frequency is displayed.  To turn off name display, uncheck Show Name for each Programmable Memory.  

The radio can be toggled between name and frequency easily from its face.  Press the Tuning Control knob (large one at lower left) briefly for toggle.  The selection remains even when the radio is powered off and back on. 

Was this article helpful?


Related Articles
 > Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
 > Repeater Access Tones