Knowledge Base:  
Groups

Last Updated: 08/08/2013
Groups for this radio are designated as follows:

0-99 are Group 1
100-199 = Group 2
200-299 = Group 3
 and so on,

So if you do not have 99 frequency's you want in group 1, you can just skip down to line 100, to get your next set of frequency's into the next group.


Was this article helpful?

Comments:
 

Related Articles
 > Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
 > Repeater Access Tones
 >
Firmware Updates

 >
CTCSS Tones

 >
Packet Mode

 >
Groups

 >
Required communication for PC programming on the TH-F6

 >
Instructions for Programming

 >
USB Option

 >
Programmer to radio data transfer

 >
Programming/Control Cable

 >
Communicating with the radio

 >
Cannot read TM-D710 - Error

 >
Packet Connection

 >
Firmware Updates

 >
Band A and Band B 2M/440Mhz Separation

 >
Name Display

 >
Unable to establish communications with radio

 >
Receive Beep When Scanning

 >
Offset Frequency requirements for the TH-F6

 > Cycling bands in VFO on the TM-D710 and TM-D710G
 >
USB-K5G use on the TM-D710