Knowledge Base:  
Cannot read TM-D710 - Error

Last Updated: 06/20/2017
When communicating with the TM-D710 using the our software the PC Port Speed must be set to 9600 bps.

To change the PC Port Speed go to menu item 519 and change it to 9600 bps.

After changing the PC Port Speed the radio must be turned Off and back On before the setting takes affect.

Cable needs to be plugged into the back of the radio body - NOT into the head of the radio.

Was this article helpful?


Related Articles
Packet Connection


Firmware Updates

Receive Beep When Scanning

 > Cycling bands in VFO on the TM-D710 and TM-D710G
USB-K5G use on the TM-D710


KRS-710 Installer


Cross Band repeat operations on TM-V71 and TM-D710/d710G radios