Knowledge Base:  
Instructions for Programming

Last Updated: 08/08/2013
Information on how to program your TH-G71A from your PC. The optional 
programming cable is a PG-4P, you will probably need an adapter to go from a 
DB25 to a DB9. Try the Radio Shack # 26-269.

In the TH-G71A you will have to Press F button, and then Band, turn the main 
tuning knob to Menu 15 Transceiver Control and turn it ON for programming. You 
will need to use Com 1 or 2 on the PC, and NOTHING CAN SHARE THAT PORT (example 
mouse) Again nothing can share those ports need for programming. If you have any 
errors, or time out messages, these are normally due to your PC settings, and 
not the TH-G71A.



Was this article helpful?

Comments:
 

Related Articles
 > Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
 > Repeater Access Tones
 >
Firmware Updates

 >
CTCSS Tones

 >
Packet Mode

 >
Groups

 >
Required communication for PC programming on the TH-F6

 >
USB Option

 >
Programmer to radio data transfer

 >
Programming/Control Cable

 >
Communicating with the radio

 >
Packet Connection

 >
Groups

 >
Firmware Updates

 >
Band A and Band B 2M/440Mhz Separation

 >
Name Display

 >
Unable to establish communications with radio

 >
Offset Frequency requirements for the TH-F6