System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
Tech Support Hours:
8:00AM - 5:30PM
Mountain Time

9:00AM - 1:00PM
Mountain Time
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
8:00AM - 5:00PM
Mountain Time
Email Sales:

RT Systems
Product Guide
RT Systems
510 Compton St, #105
Broomfield, CO 80020
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express

Knowledge Base:  
Allowing Driver Installation on the Mac

Last Updated: 05/28/2018
Drivers for RT Systems Radio Programming Cables
Installation on the Mac
Allowing the process to complete in Security and Privacy

All USB devices require drivers to identify the device to the machine and make it work with the operating system. The drivers for the RT Systems cables are distributed with the installation package for the programmer. Double click on the drivers package to begin that installation.

Step 1: Double click on the drivers package RT Systems Installation Package

Step 2: Driver installation will begin.

Click Continue.
FTM-400 Menu

Step 3: Enter the User Name and Password of the computer.

Click Install Software.
FTM-400 Backup

Step 4: System Extension Blocked message appears.

The message will clearly specify RT Systems Inc. (if installing the RT Systems Drivers) or Prolific Technology Inc (if installing Yaesu Drivers).

Click Open Security Preferences on that screen.
Open Security Preferences

Step 5: In Security & Privacy: Click Allow button at bottom of screen.

The message on this screen will specify "RT Systems Inc" if you are intalling the RT Systems drivers or "Prolific Technologies, Inc" if you are installing the Yaesu drivers.

Driver installation will be completed successfully once permission is granted.
Security & Privacy

Step 6: At the end of installation, you are prompted to move the installer to the trash.

RT Systems recommends you click Keep on this page. Then if for some reason you need to install the programmer or the drivers again, you have the files right there on your hard drive (although you can download them again in the future).
FTM-400 Write OK

Step 7: Close the installation screen and with the cable connected reboot your computer.

Was this article helpful?


Related Articles
RT Systems Programmers for the Mac Operating System

Problems with zip Installation files on Mac