Knowledge Base:  
Details about channels in Btech GMRSV1 Radio
Last Updated: 06/22/2017
The BTECH GMRS-V1 radio is interesting in its design. The first 22 memory channels are pre-programmed from the factory with GMRS simplex and repeater channels. These channels are presented on the GMRS Channels tab of the program. The receive frequency, transmit frequency, offset frequency and offset direction cannot be changed either through software or from the face of the radio. This is truly designed to be a GMRS radio.

The Receive Channels tab presents channels above 22. These can be programmed with frequencies from 137-174 MHz and 400-520 MHz and customized with Tone and other options. These channels are for receive only. You will notice there is no Transmit Frequency on any of these channels. This part of the radio is designed as a scanner.

Enjoy your radio. We trust the RT Systems programmer will help you set up details needed to get all you can from it.


Was this article helpful?

Comments:
 

Related Articles
 >
USB-70 and USB-72 Cables

 > Display of Btech UV-2501 radio
 > Cross Band Repeat... not quite what you expect