System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
Tech Support Hours:
8:00AM - 5:30PM
Mountain Time

9:00AM - 1:00PM
Mountain Time
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
8:00AM - 5:00PM
Mountain Time
Email Sales:
RT Systems
510 Compton St, #105
Broomfield, CO 80020
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express

Knowledge Base:  
DR-735 Auto Repeater Shift Functionality
Last Updated: 03/12/2018
The DR-735 has a little "quirk" when the Auto Repeater Shift option (Menu item 20) is engaged. This option will take over operations of the radio for the frequency ranges shown on page 46 of the Instruction Manual.

The "quirk" happens for channels you have programmed in memory. If the frequency falls within one of the ranges shown, the offset frequency and direction will be what you see in the table even if you set it differently when you saved that memory channel. So, it could appear one way in the program and operate differently on the radio.

When you turn off Auto Repeater Shift, you will regain the options of that memory channel as you entered them.

I would think it easier to check and set the options for offset frequency and direction manually (FUNC and VOL keys), if necessary, than to turn this option on (Menu item 20) and have the radio cease to work on channels that once worked !!

Was this article helpful?


Related Articles
 > Repeater Access Tones
 > DTMF tones in DR-135, DR-235 and DR-435 radios
 > DR-635 Out of Band Transmission
 > DJ-500 Failure to connect to the radio from the APK-500 Programmer
 > DR-735 Color Mode