System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
Tech Support Hours:
8:00AM - 5:30PM
Mountain Time

9:00AM - 1:00PM
Mountain Time
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
8:00AM - 5:00PM
Mountain Time
Email Sales:
RT Systems
510 Compton St, #105
Broomfield, CO 80020
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express

Knowledge Base:  
Memory Channels on JT-220
Last Updated: 03/15/2016
In general radios do not care if you leave blank memory channels. The radio will skip over a blank channel when turning through them. This makes it possible to organize your work on the spreadsheet of the programmer by skipping channels (lines) between groups.

This is NOT true in the JT-220 radio. If you skip channels (lines), the radio displays the channel with the "M" flashing and the details of the VFO channel. This will be the case for every memory channel that is not programmed (1-99). Remember, all the channels from the last that you program through Channel 99 will appear in this way on the radio.

Your best bet on this radio is to program the channels sequentially.

Was this article helpful?


Related Articles
 > Repeater Access Tones