Knowledge Base:  
60 Meter Channels

Last Updated: 10/28/2013
The memory channels on the Yaesu FT-950 are addressed through the CAT controls on the radio. However, the 60m frequencies are not addressed through the CAT controls.

In older Yaesu radios, the 60m frequencies could be addressed through the programming commands. That is not the case in FT-950.

The changes of the 60m frequencies will more than likely be addressed in a newer firmware update to this radio. You will be able to use the USB-63 for firmware updates to the radio.

For further information regarding the radio and the 60m changes, you will need to contact Yaesu Technical Support.


Was this article helpful?

Comments: