Knowledge Base:  
Radio Locks Up

Last Updated: 10/28/2013
If radio set to scan through the weather channels -

If all but one channel set to skip the radio will lock up on that channel when scanning or when weather alert function is used -

TO avoid the problem, be sure two weather channels have skip set to off.

This is an inherent problem with the radio, Yaesu is aware of it, it is not an issue with our software.

If the radio locks up, it can be corrected by being modified and reset (which is a hard reboot). The radio can un-modify to achieve the same correction if necessary.



Was this article helpful?

Comments:
 

Related Articles
 >
APRS/Packet Sort Filter

 >
DCS Polarity

 >
Firmware V 1.2 Update Notes

 >
Half Deviation

 >
Lock Type

 >
Mono or Dual Receive Toggle

 >
Navi - not working, radio stays in standby

 >
Programmed frequencies do not show on radio.

 >
S Meter Indicators

 >
Scanning

 >
USB-81 Cable

 >
WX Channels

 > Cannot Start Cross-Band Repeater Mode