System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
Tech Support Hours:
8:00AM - 5:30PM
Mountain Time

9:00AM - 1:00PM
Mountain Time
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
8:00AM - 5:00PM
Mountain Time
Email Sales:
RT Systems
510 Compton St, #105
Broomfield, CO 80020
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express

Knowledge Base:  
Loss of Audio

Last Updated: 08/28/2013
After programming, the radio has no audio from the built in speaker. 

This is a strange one since by default the radio puts audio to the internal speaker.  There is, however, a setting in the radio that is applicable when an external speaker is attached. It seems at times that this setting affects the radio even when an external speaker is not attached. 

In Settings | Common tab | Left Speaker (Right Speaker) 

By default these are set to External in anticipation of your attaching an external speaker.  According to the manual, the setting for this option should affect the radio only when the external speaker is attached. It seems, although it has not been thoroughly tested, that there is some combination of moves that allows this setting to affect the radio even when an external speaker is not connected.  

By setting Left Speaker and Right Speaker to Internal/External or Internal, audio will return to the internal speaker of the radio. 

Was this article helpful?


Related Articles
A tone is heard by the receiving station at the beginning of each of my transmissions.

Beep at the beginning of transmission

Cannot Get from or Send to radio

Clone Mode Center Button

Power Button

Radio will not access start-up menu

Toggle Channel Name / Frequency display