Knowledge Base:  
Clone to TX Issue

Last Updated: 08/19/2013
Can't get from clone to TX to transmit data - Are you using the correct cable, calls for USB-57A (color is red - must have the 3 black rings on the end) - can also use the USB-57B (yellow).  

The PTT (push to talk) needs to be held 2-3 seconds, seems like a long time, are you holding it long enough?  

Is the radio locked? - a small padalock will show on the display, to unlock, press the F/L key for one second - same sequence reverses this.

Was this article helpful?


Related Articles
Cable Requirements