The FTX-1 Radio Programming Software is designed to make it easier to program your radio. Details of memory channels and other set menu options of your radio are in the program to access and study at your pace. No more “function key frustration” from trying to set options from the face of the radio.

Memory Channels Include:

• 999 Memory Channels
• 50 Limit Memories (25 pair)
• 5 Home Channels
• 15 60 Meter Memories

Other Menu Item Categories Include:

• Display Setting
• CW setting
• Operation Setting
• Radio Setting
• APRS Setting
• Presets

The Radio Programmer Is for so Much More than Just Memory Management.

The programming process begins by first installing the program. Drivers for the cable are installed during this process.

Next, connect the RT Systems programming cable and give the operating system a minute to complete driver setup.

Make the connection between the radio and the computer. Complete Communications | Get data from radio. This “syncs” the radio and computer. Even if the radio is not yet set up with memory channels, there are details that the programmer needs to get from the radio.

Start setting up details for your radio in a “factory fresh” file (File|New) or in the file that was created when you did Communications | Get data from the radio. Begin by entering a receive frequency (that will be the frequency published for the repeater). When you press Enter or Tab to leave the Receive frequency field, the program will complete details for the channel. Then customize Name and Tone to match the details you have for that local repeater.

Use the links to external data sources (File | External data) built right into the programmer to access repeater details for your area or for a location you plan to visit. Then with just a few button clicks, you have a file with hundreds of entries and all you typed was your location (i.e., zip code or city).

Save your file as you work. This is a computer, after all, and you would hate to lose your work should the system fail. Actually, create and save as many files as you want or need. You could have one file for home, a different one for the vacation house, another for the trip to your son’s house, another for the yearly 3K run and picnic where you help direct traffic and want the radio to be programmed with only the frequencies for that event. Remember, radio programming is an overwrite process. Everything in the radio is replaced by everything in the file.

Limit Memories

Limit Memories are used by the radio for Program Scan. Program the same details for Limit Memories as for regular memory channels. Many of the Limit Memories are preprogrammed in the radio and while the frequency can be changed to another within the band, they cannot be left blank.

Home Channels

Home/Call channels are special memories accessed through one button recall on the radio. These channels are preprogrammed in the radio and while the frequency can be changed to another within the band, they cannot be left blank.

60 Meter Memories

Set options for the 60-Meter channels preprogrammed in the radio. Frequencies and operating mode for these channels cannot be changed. These channels can be included in the memory group you are using.

Display Setting

Use this setting to control the radio’s display functions as well as customizing the programmable buttons for easy one touch access to a feature.

CW Setting

Use this setting to adjust the CW menu items of the radio.

Operation Setting

Customize options to achieve optimum radio performance.

Radio Setting

Customize options that vary based on operating mode to get the best performance from the radio for a certain activity.

APRS Setting

Use this screen to enter APRS functions of the radio.

Presets

The radio offers five preset configurations of the 17 options for FT-8. Configure the options and name the configuration to identify it easily to select it from the face of the radio.

Data management is the key to getting everything you can from your radio. RT Systems Programmers give you many ways to manage and organize frequencies and settings to help you enjoy your radio and activities.

Remember, the program for your radio is specific to this radio model. While cables may work for many models, the programmer must be customized so the radio things it is talking to a "twin" of itself. Review Hardware Requirements here for details on operating systems and radio to computer connections.

RT Systems works to keep radio programming organized so everything works the first time and every time.

Visit the entire site for all the great RT Systems products, Knowledge Base articles, and How to Videos. You answers may be just a click away.