The FT-710 Radio Programming Software is designed to make it easier to program your radio. Details of memory channels and other set menu options of your radio are in the program to access and study at your pace. No more “function key frustration” from trying to set options from the face of the radio.

Memory Channels Include:

• 999 Memory Channels
• 5 60m Channels
• 19 Limit Memories (9 pair)

Other Menu Item Categories Include:

• Menu Panel
• Radio Settings
• CW Settings
• Operation Settings
• Presets

The Radio Programmer Is for so Much More than Just Memory Management.

The programming process begins by first installing the program. Drivers for the cable are installed during this process.

Next, connect the RT Systems programming cable and give the operating system a minute to complete driver setup.

Make the connection between the radio and the computer. Complete Communications | Get data from radio. This “syncs” the radio and computer. Even if the radio is not yet set up with memory channels, there are details that the programmer needs to get from the radio.

Start setting up details for your radio in a “factory fresh” file (File|New) or in the file that was created when you did Communications | Get data from the radio. Begin by entering a receive frequency (that will be the frequency published for the repeater). When you press Enter or Tab to leave the Receive frequency field, the program will complete details for the channel. Then customize Name and Tone to match the details you have for that local repeaters.

Use the links to external data sources (File | External data) built right into the programmer to access repeater details for your area or for a location you plan to visit. Then with just a few button clicks, you have a file with hundreds of entries and all you typed was your location (i.e., zip code or city).

Your radio has several “kinds” of memories. All of which are included in the programmer. They are presented on separate tabs accessed at the bottom of the screen. This keeps them organized for you and the radio. Remember, you don’t have to do anything with these additional channels if you are not using them. They are set up automatically to satisfy the requirements the radio. Do not try to delete preprogramed entries (i.e., usually on VFO tab). These can be changed, but not deleted. The radio must have a value in that spot to function.

Save your file as you work. This is a computer, after all, and you would hate to lose your work should the system fail. Actually, create and save as many files as you want or need. You could have one file for home, a different one for the vacation house, another for the trip to your son’s house, another for the yearly 3K run and picnic where you help direct traffic and want the radio to be programmed with only the frequencies for that event. Remember, radio programming is an overwrite process. Everything in the radio is replaced by everything in the file.

Limit Memories

Menu Panel

Options on the face of the radio can be set from the computer. Not all options of this panel can be included here as many are banned and operating mode dependent.

Radio Settings

Customize options that vary based on operating mode to get the best performance from the radio for a certain activity.

CW Settings

Use this setting to adjust the CW menu items of the radio.

Operation Settings

Customize options to achieve optimum radio performance.

Display Settings

Use this setting to control the radio’s display functions as well as customizing the programmable buttons for easy one touch access to a feature.

Presets

The radio offers five preset configurations of the 15 options for FT-710. Configure the options and name the configuration to identify it easily to select it from the face of the radio.

Data management is the key to getting everything you can from your radio. RT Systems Programmers give you many ways to manage and organize frequencies and settings to help you enjoy your radio and activities.

Remember, the program for your radio is specific to this radio model. While cables may work for many models, the programmer must be customized so the radio thinks it is talking to a "twin" of itself. Review Hardware Requirements here for details on operating systems and radio to computer connections.

RT Systems works to keep radio programming organized so everything works the first time and every time.

Visit the entire site for all the great RT Systems products, Knowledge Base articles, and How to Videos. You answers may be just a click away.