RPS-XS20H Programming Software for the Wouxun KG-XS20H

Description
Cable Info
*Radio Compatibility
Windows OR Mac

RT Systems RPS-XS20H Programming software makes it easy to manage memory channel information and other menu settings of the Wouxun KG-XS20H mobile radio.
Click here for more Information.

Spreadsheet layout with many point and click options.
"Read" the current configuration from the radio for editing or start from scratch in a new file.
The programmer has copy and paste of memory channel information between files.
Column editing for changing several channels with minimal typing.
An easy interface to Internet based data to get repeater information for your location, a travel route, or a vacation spot. Repeater details available for locations in and outside the US. (separate purchase or subscription may be required).
Other built-in frequency lists for easy memory channel entries (check File|External data in the programmer before you spend time on internet searches for frequencies. You may find just what you need!)
For DMR programming, links to contact and repeater information. Easily get and send details for all those contacts you're hearing.
Copy and paste spreadsheet or website data.
Much more than just memory channel programming with settings for other radio menu items.
RT Systems Programming Software for the

Windows version requires Windows 8/8.1 (full version), Windows 10 for 32 and 64 bit platforms or Windows 11.
Mac version requires Mac OS X 10.13.6 (64-bit) or newer.

The RT Systems programmers now work with "generic" USB cables. USB cables have become a little more consistent and reliable. Consider this as you decide which cable will be best for you. Remember: This radio programs through the 8-pin modular port under the data cover on the back of the radio. The radio is not designed to transfer programming details through the mic jack on the front or the speaker jack on the back. There are three tries here... only one will work.

Generic USB Cable	Cables with proper pin spacing for the radio have been around for a long time with varying designs for USB circuitry. some work well. Some work with varying degrees of success. Some don't work at all. Both circuitry design and wiring could be the issue. If you have a cable that works, it should work with the programmer. A generic cable may cease to work on Windows 11. When using a generic USB cable for programming, you are responsible for finding and installing drivers. You are responsible for identifying the com port in use by the cable, assigning that in the program and changing it should you use a different cable the next time that assigns to a different com port designation. RT Systems cannot help you with cable setup... there are just too many cables out there for us to begin to know what you have.

USB-W5R	Performance of the programming system is guaranteed only with the RT Systems cable. RT Systems programming cables work on Windows 11. Drivers are installed during installation of the programmer. Sometime help is needed to complete driver installation: we are here to help with that. You do not need to know or assign a com port in the program. The programmer finds the cable automatically. If there is a problem with communications between the radio and the computer, we are here to help....and we know LOTS of tricks!!

RPS-XS20H Programming Software Only for the Wouxun KG-XS20H radio*

Related Items

Mailing List

About Us

International Tracking

Dealers

Product Guide

Terms and Conditions