The WCS-2820 Programmer is designed to give you the ease and convenience of programming the memories and set menu options of your radio from your PC including settings for D-Star operations. The D-Star calculator built into the program gives you D-Star information from all around the world to use. You can easily set up your D-Star channels with just a few mouse clicks.
Memory Channels Include:
Other Menu Item Categories Include:
* Icom UT-123 required in radio for D-Star.
The Radio Programmer Is for so Much More than Just Memory Management.
With the WCS-2820 Programmer you can Begin a new factory fresh file into which frequencies and option settings are entered. Or, you can read from the radio, store these details on your computer and make changes. Then, with minimal button pushing, send the new configuration back to the radio.
The Programmer allows you to create and save as many files as you want for your radio. Files can even Be shared Between users via email or the Internet. Any RT Systems Version 4.50 program can open a file from any other RT Systems Version 4.50 programmer.. even from a different radio.
Managing all the options of this great little radio Becomes easy with the Programmer. The cut, copy, paste and insert features of the Programmer make channel management easier than ever.
Open more than one file at a time. Memory channel information can Be copied from one file to another within the Programmer making it really easy to set up a new file.
Limit MemoriesLimit Memories are used by the radio for Program Scan. Program the same details for Limit Memories as for regular memory channels. Many of the Limit Memories are preprogrammed in the radio and while the frequency can Be changed to another within the band, they cannot Be left blank.
VFO A and VFO BThe program makes available the same VFOs as in the radio (usually one per band). Remember these are not real memory channels since the details are lost as soon as you tune the radio manually. There is no one button recall for these. You do not need to program into VFO Before programming details into a memory channel. These channels are preprogrammed in the radio and while the frequency can Be changed to another within the band, they cannot Be left blank.
CallHome/Call channels are special memories accessed through one button recall on the radio. These channels are preprogrammed in the radio and while the frequency can Be changed to another within the band, they cannot Be left blank.
GPS MemoryOnce stored in the radio during GPS operations, these channels are read from the radio with the other details.
Memories and D-Star ColumnsThe IC-2820 handles D-Star and FM memories in the general memories. It is here in the Programmer that the D-Star specifics for each channel are found. The D-Star columns Become active once Operating Mode is set to DV.
D-Star SettingsSet "My Callsign" to your FCC issued callsign.
The lists of Your Callsigns and Rpt Callsigns are just storage. The callsigns used during a transmission are programmed in the memory channel. These lists are available to make a selection from; however, the callsign does not need to Be entered here first.
Tx messages, name/location/equipment details, etc., scroll on the radio receiving your call.
Source and Destination:The D-STAR Calculator automatically sets up the Talk, Echo, Info and Unlink channels for your "Source" repeater. The "Source" is the repeater you access to Begin your adventures. Just like with analog repeaters, you must Be able to hit the "Source" repeater.
Talk - the CQ channel for talking with others.
Echo - a test function that repeats your transmission back to you. Good for letting you know that you are, or are not, hitting the repeater.
Info - The function that triggers a status response from the repeater (i.e. linked to where?.. not linked).
Unlink - Disconnects the current link of the repeater (where allowed). More widely used to disconnect a link you establish. Remember.. if you link, it's always polite to unlink (hang up the phone) when you're done unless someone has joined you locally. Then you might leave it to them to unlink.
The calculator sets up the same channels for a DVAP hotspot. You enter your frequency only once.
Route/Link to Repeaters:Now that you identified your "Source", let's set up your Destination. In D-STAR you can Link to Repeaters or Route to Repeaters. To set up channels that link or route, use the drop down at the top of the first tree to select your function, then select your repeaters by checking a country, region, state, city or individual repeater. A counter Below the list keeps track of how many you have selected.
Link to Reflectors:For even more fun, and a great way for a Beginner to get started, Link to Reflectors. D-STAR reflectors are a special type of Internet connected gateway that rebroadcasts each signal to all the other linked nodes or repeaters. Remember.. EVERYBODY is listening.. but that's what makes it fun. You have a whole world to talk to through your local repeater, "Source", linked to a reflector. To set up a channel that links your repeater to a reflector, check the box for that reflector in the Link to Reflector tree.
Click Apply once to set up all these channels for the radio.
The Resulting File:
|The resulting channels are set up and ready to go.|
Your callsign, Rpt 1 Callsign and Rpt 2 Callsign are set automatically.. No wondering which suffix goes where, or if it is positioned correctly. That is all done for you.
Name can Be edited here to Better identify the station. Name is what you see on the radio. It is not part of the D-STAR commands for use of the system. It may Be all you have to identify the function of a channel. (Notice the frequency is the same for ALL these channels although they each do something different on the D-STAR network.) Make the Name something you understand.
Note: Be sure to turn ON the name display for the radio to use what you enter in the name field.
To Use these Settings for D-STAR Fun:
F1 Common and F2 Common
Use these screens to customize other set menu features of the radio. Check boxes toggle features on or off, drop down menus list all selections and blank boxes for personalized entry add to the ease of setting up your radio exactly like you want it.
The entries on the Settings screens are made for you to "Set and Forget". Once settings are customized, you are prompted to save Before exiting. The saved settings will Be there every time you create a new frequency file.
Enter DTMF memory details and customize options for this function of the radio.
Bank Names and Linking
Set up Name for bank selection on radio, scanning links, and Active Bank. Use F1 and F2 for different configurations for separate activities.