The ADMS-FT1D Radio Programming Software is designed to give you the ease and convenience of programming the memories and set menu options of your radio from your PC. Any memory channel with all its details can Be sent to the radio with a simple keystroke.
Memory Channels Include:
Other Menu Item Categories Include:
The Radio Programmer Is for so Much More than Just Memory Management.
The programming process begins by first installing the program then installing (and allowing) the drivers for the cable. Be sure to complete both of these steps.
Save your file as you work. This is a computer, after all, and you would hate to lose your work should the system fail. Actually, create and save as many files as you want or need. You could have one file for home, a different one for the vacation house, another for the trip to your son’s house, another for the yearly 3K run and picnic where you help direct traffic and want the radio to be programmed with only the frequencies for that event. Remember, radio programming is an overwrite process. Everything in the radio is replaced by everything in the file.
Skip MemoriesThese frequencies are skipped during VFO scanning. These channels can Be used for additional regular memory storage if you don't use VFO scanning.
VFO A and BThe program makes available the same VFOs as in the radio (usually one per band). Remember these are not real memory channels since the details are lost as soon as you tune the radio manually. There is no one button recall for these. You do not need to program into VFO Before programming details into a memory channel. These channels are preprogrammed in the radio and while the frequency can Be changed to another within the band, they cannot Be left blank.
HomeHome/Call channels are special memories accessed through one button recall on the radio. These channels are preprogrammed in the radio and while the frequency can Be changed to another within the band, they cannot Be left blank.
Marine MemoriesPreprogrammed in the radio, the Marine Memories cannot Be changed. Receive frequency, Transmit frequency and Offset direction are disabled to prevent editing. These channels can Be included with other memories in Banks 1 - 24 by checking the box for that Bank.
SW MemoriesFrequencies for shortwave listening are preprogrammed in the radio with a name identifier and cannot Be changed. Receive frequency and Name are disabled to prevent editing. These channels can Be included with other memories in Banks 1-24 by checking the box for that Bank.
Weather MemoriesTen NOAA weather frequencies are preprogrammed in the radio and cannot Be changed. Use this screen to edit Name, set Skip conditions and add a weather channel to a bank along with other memories.
Radio Menu Settings
Common 1 and 2
Use these screens to customize many set menu features of the radio. Check boxes toggle features on or off, use drop down menus list all selections and blank boxes for personalized entry add to the ease of setting up your radio exactly like you want it.
The entries on the Settings screens are made for you to "Set and Forget". Once settings are customized, you are prompted to save Before exiting. The saved settings will Be there every time you create a new frequency file.
Set options for the Opening Message and text message details.
Enter DTMF memory details and customize options for this function of the radio.
APRS and APRS Beacon
Customize additional features of the FT-1D radio for advanced APRS functions.
Configure GPS function settings.
Configure options for group messaging.
Click here to learn more about using Preferences to customize your radio programming experience.