System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  

Knowledge Base : memory scanning
Page of 1
FT-8900 Memory Scanning

The FT-8900 does not have banks into which memory channels can be isolated. It also does not have band scanning for memory channels (would have been nice... but it's just not part of the design of tha
Auto Step and Limit Memory Scanning

The Limit Memory channels that are PMS scanning setup in the FTM-400 offer a Step option. This option is used by the radio during scanning only if Auto Step is turned off. The default for Auto St
MS Error when scanning Yaesu Radios with Banks

In a recent report from a customer, they stated when trying to scan a certain bank in their VX-8G, the radio would display "MS Error". Scanning appeared to work fine in Bank 2, but not Bank 1.
Memory Banks

To access the memory banks in the IC-2300 once they are programmed:  Press M-Call to access memory mode (at this point all your memory channels will be available when you turn the tuning k
Groups

Page 18 of the manual details Memory Channel Groups. Let me summarize here. The groups are predefined for the memory channels as shown in the first chart. Channels 0-49 are in Group 0, Channels 50-99
PMS Steps
This is what I found with the FTM-400 and PMS scanning. Using programmer version 5.00.47, I set frequencies in the Band A and Band B Limit Memories. I also set Step to 5, 25, 12.5, 50, 100, and Aut
Receive Beep When Scanning

To turn off the Beep heard when a signal is received during scanning, you must control Menu Item Number 624 Rx Beep. That item can be set separately for each Programmable memory. If you are not usi
memory channels. Use banks to separate channels into those you use at home, for a special event, for a trip to a distant place, or those you us
memory channels. Use banks to separate channels into those you use at home, for a special event, for a trip to a distant place, or those you u