System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  

Knowledge Base : Windows 10
Page of 1
Installation of the Programmer on Windows 8, Windows 8.1 and Windows 10
On some machines running Windows 8, 8.1 and Windows 10, installation of the RT Systems Programmers will display an error warning of Windows version compatibility. This seems to happen on machin

Installing the software to a machine without a CD drive.


Asked often in reference to the new Netbooks and other "mini" computers. This process is completed easily by mapping a shared network CD drive to a letter designation on the receiving machine. On
Mac Drivers for RT Systems USB Cables
The RT Systems programmers are Windows based. They can be run successfully in a good virtual machine such as Parallels or VMware. Provided here are drivers for the RT Systems USB cables for
Error - Can't load Ftd2xx.dll - Error

1) Has the RT Systems USB cable been plugged in yet? If not, please attach the appropriate RT Systems USB cable for this programmer. Give Windows a little time to complete installation of the drivers
FT_W32_GetComMask - Error

Error with USB cable Customer reports error with USB cable when accessed in programmer. The error message is: "CommondataV4 Error: Can't Find FT_W32_GetCommMask" I get this error twice an
Runtime not installing or Side by Side configuration error message

This error appears when the programmer is first run after installation. A Windows error appears with text that include a reference to a "side by side" error. This error is results from the runtime fi
USB-63

The USB-63 cable works with many Yaesu and Kenwood HF radios: specifically those with a 9-pin male CAT connection on the radio.   The USB-63 works with Yaesu FT-450 FT-920 FT-950 FT-10
Windows Device Manager

If you are having problems with your RT Systems USB cable, it can be beneficial to open the Device Manager. This will allow you to determine if your computer properly 'sees' your cable. To open the D
Error During Update - updatelog.txt

During updates, or immediately following program installation, you may get an error that reads: "An error must have occurred Please send the file that is shown in the next screen to techsupport@rtsyst
Programming the FTM-400 via the SD Card
FTM-400 Data Transfer The ADMS-M400 Radio Programmer for the Yaesu FTM-400 Getting the initial details from the radio.
No Radio Modules Were Found Error

This error most commonly occurs upon trying to start up the radio programmer immediately after installation. There are two different methods that can help fix this problem - we recommend you try meth
Send Data to Radio Fails (European Models Only) IC-7100, IC-9100

This guide may apply in cases where the following are true: You can get data from the radio (click Communications > Get data from radio) with no problems You cannot send data to the radio
Getting Started with the ADMS-FT1D Programmer
FT-1D Data Transfer The ADMS-FT1D Radio Programmer for the Yaesu FT-1D radio Programming the Yaesu FT-1D radio begins with gett
Quick Guide to Reading and Writing the FTM-400 Radio

Follow these exact steps from beginning to end to get data from or send data to the FTM-400 radio. You must get data from the radio before you can send data to the radio the first time. This gets bac
Driver Installation on Windows 2000

USB Install on Windows 2000 C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBComDrivers\Drivers VX-8 Only - C:\Program Files\Common Files\RT SystemsV4\RTDrivers\USBDrivers\Drivers
Updating Version 4 after failure

You have to ensure no compatibility settings are active, allow the program full access in McAfee, and briefly turn off Windows Firewall.   If the program update fails, you have to re-install
Less Than 6 Characters Error Occurs After Update

This error was caused by the update released on 13 Feb. 2014. The update expanded the functionality of the programmer to include the radio's GPS and scan settings, but the expansion rendered old sett
IC-7300 Memory Channels

To change between memory channels on the IC-7300, first touch the VFO/Memory Icon on the right of the screen. When the window opens, select Memory. The Icon will change to MEMO when you are in memory