System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  

Knowledge Base : Scan add
Page of 1
After the last update, my scan stopped working.
In early January, an update to the Wouxun programmer(s) affected the "Scan Add" function. This update broke the files previously had "Scan Add" turned on, it shut the feature off. Affected programmer
After the last update, my scan stopped working.
In early January 2013, we made an update to the Baofeng programmer and the "Scan Add" function. This update broke your files in that if you previously had "Scan Add" turned on, it shut the feature off
Memory Banks

To access the memory banks in the IC-2300 once they are programmed:  Press M-Call to access memory mode (at this point all your memory channels will be available when you turn the tuning k
Basic Settings Descriptions

This is a list and description of some of the more important settings in the RT Systems programmer. Please note that this is a general list – some radios may not have all of
Scanning

Complaint   -  After programing both the Left and Right Memories,   only the Left memories will scan . When attempt to scan on the right memories the radio displays a message Erro
WX Channels

The only way to get to Wx Channels is to reprogram one of the keys for WX.       If radio set to scan through the weather channels -     If all but on
Channel Scan error: "ERROR No MEMORY"

This error occurs when the FTM-400 radio does not detect any valid channels to scan. The following are two solutions we have found. Make sure you have at least one channel on your radio with th