System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  

Knowledge Base : Offset Frequency
Page of 1
Offset Frequency requirements for the TH-F6

The Kenwood TH-F6 handheld requires the offset frequency to be from 0 to 59.95 MHz in 50kHz steps (i.e., .05 MHz). Offset Frequencies must be x.00, x.05. x.10. x.15. x.20, etc to 59.95 MHz. (Note 600
Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
Commercial radios have long been able to use one CTCSS frequency for tone encode (to the repeater) and a different one for tone decode (for the radio). This functionality adds flexibility for repeater
The Option to not transmit
Some radios available today have the option that allows you to prevent or inhibit transmit on a given channel. Included here are those models and the steps to prevent or inhibit transmission (to Not
Basic Settings Descriptions

This is a list and description of some of the more important settings in the RT Systems programmer. Please note that this is a general list – some radios may not have all of
DR-735 Auto Repeater Shift Functionality
The DR-735 has a little "quirk" when the Auto Repeater Shift option (Menu item 20) is engaged. This option will take over operations of the radio for the frequency ranges shown on page 46 of the I
FT-991 Repeater Offsets

The FT-991 is interesting in how it handles offsets. 1) There is one offset value per band that you can adjust. See menu items 80, 81, 82, and 83. 2) These are not the onl
IC-7300 Repeater Operations

The IC-7300 will work repeaters across the bands. As we all know, repeater operations use a transmit and receive frequency. Setup for these gets a little complicated when you have only one offset fre
Details about channels in Btech GMRSV1 Radio
The BTECH GMRS-V1 radio is interesting in its design. The first 22 memory channels are pre-programmed from the factory with GMRS simplex and repeater channels. These channels are presented on the GMR