System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Knowledge Base > Yaesu
Choose a sub category:
FT-10 FT-100 FT-11
FT-1500 FT-1900 FT-1D
FT-2000 FT-2200 FT-250
FT-2500 FT-270 FT-277
FT-2900 FT-2D FT-40
FT-450 FT-51 FT-60
FT-767 FT-7800 FT-7900
FT-817 FT-847 FT-8500
FT-857 FT-8800 FT-8900
FT-897 FT-90 FT-950
FT-991 FTM-10 FTM-100
FTM-3200 FTM-350 FTM-400
VR-120 VR-500 VR-5000
VX-1 VX-10 VX-2
VX-3 VX-6 VX-7
VX-8DR VX-8G

Page of 7
"y" Splitter

Y- Splitter allows more than 1 accessory to be plugged into the CAT port of this (also the 817 and 897) radio at one time - the Cat Mate is available from W4RT (suggest you Google search them).
2 Meter Radio

The FT-270 is a 2 meter only radio thus transmitting on in the 144-148 range.
440 Only Radio

The FT-277 is a 440 meter only radio - comparable to the 270 (which was 140 frequency, but 2 meter only)
6 & 10 Meters - Right and Left sides

6 & 10 Meters   - Yes, you can program 6 and 10 meters into this radio.  Type them into memory channels in the program in any order.   The left side of the radio will use and
60 Meter Channels

The memory channels on the Yaesu FT-950 are addressed through the CAT controls on the radio. However, the 60m frequencies are not addressed through the CAT controls. In older Yaesu radios, the 6
60 Meter Issue

60 Meter Issues   -    If the radio has been modified, the 60 meters will become inaccessible. The FT-857D/FT-897D and FT-817D each have 5 preprogrammed 60M channels. The frequ
60 Meter Issue

60 Meter Issues   -    If the radio has been modified, the 60 meters will become inaccessible. The FT-857D/FT-897D and FT-817D each have 5 preprogrammed 60M channels. The frequ
60 Meter Issue

60 Meter Issues   -    If the radio has been modified, the 60 meters will become inaccessible. The FT-857D/FT-897D and FT-817D each have 5 preprogrammed 60M channels. The frequ
60 Meters

If you can't access these frequencies on a "D" radio (like you were able to in the past but not now), check that the radio is not in a Memory Group. To check, please turn the knob while in memor
60 Meters

If you can't access these frequencies on a "D" radio (like you were able to in the past but not now), check that the radio is not in a Memory Group. To check, please turn the knob while in memor
A tone is heard by the receiving station at the beginning of each of my transmissions.

The Internet Connection feature of the radio is turned on. To turn it off press and release the left Vol knob. This will be the lower button on the left which is often mistaken as the one used fo
A tone is heard by the receiving station at the beginning of each of my transmissions.

The Internet Connection feature of the radio is turned on. To turn it off press and release the left Vol knob. This will be the lower button on the left which is often mistaken as the one used fo
All Band Mode

The VX-2 radio will receive in 11 different bands as detailed on page 10 of the radio's manual.  These include broadcast, shortwave, TV bands, etc.   If the radio gets toggled into Ham O
APRS/Packet Sort Filter

        Sort:  This is reset to Time when the radio is turned off. This was true in the original radio and is still true in the 1.2 version.  It i
Auto Step and Limit Memory Scanning

The Limit Memory channels that are PMS scanning setup in the FTM-400 offer a Step option. This option is used by the radio during scanning only if Auto Step is turned off. The default for Auto St
Bank Names

From the programmer, "Settings" - select Bank Names and Linking, select in a Bank square, back space until it is blank, now type in the 6 characters you want to name the bank (size is limited by the
Bank Names

Starting with the VX-6 radio and newer model Yaesu radio's, you can change the name of the banks in each radio.
Banks - Memory Groups

BANKS or MEMORY GROUPS AS THEY ARE KNOWN ON THIS RADIO ... On this radio, the banks are 1-20, 21-40, 41-60 etc, so you will need to set up your channels accordingly if you want them in banks.
Banks in the FT-857

Banks in the Yaesu FT-857 are predetermined into groups of 20. To use these, the details must be entered into memory channels according to the predetermined schemes (1-20 / 21-40 / 41-60 / etc).
Banks or Memory Groups

BANKS or MEMORY GROUPS AS THEY ARE KNOWN ON THIS RADIO... On this radio, the banks are 1-20, 21-40, 41-60 etc, so you will need to set up your channels accordingly if you want them in banks.