System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Banks - Accessing on the radio after programming

Last Updated: 11/30/2013
Once programming of the IC-92 is complete, power the radio off and back on to return to normal mode.

Press [MR] repeatedly to enter memory bank mode.... this is the tricky part of the process. You know you're in memory bank mode if a letter follows the MR designation on the face of the radio. See the screen shots on page 76 of the Instruction manual for the radio.

Once in memory bank mode, press the [BAND] key to change banks. Watch as the letter changes between those in which channels are assigned. Empty banks are not included. (The manual says to hold the [BAND] key while turning the dial. While this works, pressing [BAND] repeatedly seems an easier on-handed action.)

REMEMBER: If the MR designation is followed by three numbers, you are still in memory mode and cannot select a bank. Press MR one more time to get the letter in with those number. Then you are ready to select a bank to use.


Was this article helpful?

Comments:
 

Related Articles
 > Repeater Access Tones
 >

IC-2100 Narrow Band Operations


 > Banks on the IC-92 - Accessing after programming
 >
Radio buttons not working

 >
No programmer for this radio

 >
Software and cable

 >
Memory Banks

 >
Software and Cables

 >
Software and Cables

 >
Dual Display

 >
Control Cable

 >
No programmer for this radio

 > Banks
 >
Cable Information

 >
Name Display

 >
Skip Channels

 >
Data Transfer

 >
Details for IC-756

 >
Port for Data/Programming Cable

 >
D-STAR Calculator not available

 >
Cable Requirements

 >
D-STAR Settings & Calculator grayed out

 >
Buttons not working on radio

 >
CI-V Baud Rate affects programming