System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Band A and Band B 2M/440Mhz Separation

Last Updated: 08/08/2013
All memory channels are a part of Band A AND Band B.  There is not a Band A set of memories and a Band B set of memories. 

However, the radio can be made to hide selected bands making it appear that memory channels are not a part of the left or right memories.  

This is a Programmable Memory function that can be set 5 different ways.  

Access Settings | PM 0 - 5 Settings | TX/RX/Repeater tab | Band Mask section.

Check the bands you want to hide on each side.  Leave the one(s) unchecked that you want to use on each side.  

Save the settings file and send the file to the radio.  The new settings will be reflected once the Send Data to radio process is complete.  




Was this article helpful?

Comments:
 

Related Articles
 > Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
 > Repeater Access Tones
 >