System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
CTCSS Tones

Last Updated: 08/08/2013

Note: Kenwood radios use a system of 42 CTCSS tones. Other radios use as many as 50 tones. When you copy from another file there may be a problem if the CTCSS value from the original data does not equal a value available in the Kenwood. Should this happen, the program defaults to 67.0 for the CTCSS frequency. After using copy and paste, check the CTCSS tones for 67.0Hz and verify that this value is what you want.

Tones that do not exist in Kenwood radio's include 159.8, 165.5, 171.3, 177.3, 183.5, 189.9, 196.6 and 199.5



Was this article helpful?

Comments:
 

Related Articles
 > Dual Tone Radios - Radios that can use different tones for encode and decode for the same memory channel.
 > Repeater Access Tones
 >
Firmware Updates

 >
Packet Mode

 >
Groups

 >
Required communication for PC programming on the TH-F6

 >
Instructions for Programming

 >
USB Option

 >
Programmer to radio data transfer

 >
Programming/Control Cable

 >
Communicating with the radio

 >
Packet Connection

 >
Groups

 >
Firmware Updates

 >
Band A and Band B 2M/440Mhz Separation

 >
Name Display

 >
Unable to establish communications with radio

 >
Offset Frequency requirements for the TH-F6