System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Hints and tricks for setting up the LT-925UV radio

Last Updated: 01/13/2016
  • Name Display requires three things:
    1. Enter the name for the memory channel on the main page of the programmer
    2. Check the Show Name box for the memory channel
    3. Go to Settings | Radio Menu Settings to be sure Channel Name Enabled is checked
    4. Names are displayed on all channels on both the A and B display. They cannot be set separately.

  • The radio will be in memory mode when you finish sending a file to it from the programmer.
  • Use the P3 key with a short touch to toggle between VFO and Memory mode. Both A and B toggle modes
  • Use the P1 key with a short touch to toggle between A and B


Was this article helpful?

Comments: