System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Firmware V 1.2 Update Notes

Last Updated: 10/28/2013

   1)  The radio holds the version number in two places.  One is displayed to the user when the radio is put into Clone mode.  The other is held internally.  The internal one can be changed by the programmer.   If a customer sends an old file to the radio without doing a Communications | Get data from radio, that internal number will be changed back to 1.1 although the number they see on the screen is still 1.2.  The customer needs to reset the radio again.  Then do Communications | Get data from radio BEFORE they send a file back to the radio.  This gets the numbers correct in the program. 

2)  Changes in V1.2  

Settings:  Common - Programmable Keys  all have more options.  If one of these options is sent to an old radio, the programmable key will be empty.  

Settings:  APRS/GPS -   Added Color settings for several options /  Added Comport and Waypoint settings /  Changed APRS Band and Data Band defaults

Settings:  APRS Beacon - Added Beacon Filter option ALTnet / Added My Packet Popup option (checkbox) / Added in Status Text TX rate 1/2(freq) - 1/8(freq) options / Added Sort Filter options for Filter

Settings: Options - Added Voice Alert options



Was this article helpful?

Comments:
 

Related Articles
 >
APRS/Packet Sort Filter

 >
DCS Polarity

 >
Half Deviation

 >
Lock Type

 >
Mono or Dual Receive Toggle

 >
Navi - not working, radio stays in standby

 >
Programmed frequencies do not show on radio.

 >
Radio Locks Up

 >
S Meter Indicators

 >
Scanning

 >
USB-81 Cable

 >
WX Channels

 > Cannot Start Cross-Band Repeater Mode