System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
IC-9100 USB Driver Setup

Last Updated: 11/29/2012
The IC-9100 has built in USB circuitry. A USB-A to USB-B cable can be used to connect the radio to the computer through the USB port on the back of the radio..

If the radio is connected while it is on, the drivers for this USB circuitry will not load. Without the drivers loaded, there will be no communication between the radio and the computer for any program. Checking in Device Manager, there will be no listing for the radio under Ports - Com and Lpt.

Turn the radio off, count to 10, turn the radio back on. The power on sequence will trigger New Hard Ware found and driver installation.


Was this article helpful?

Comments:
 

Related Articles
 >
Cable Requirements

 >
Send Data to Radio Fails (European Models Only) IC-7100, IC-9100