System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
CTCSS or PL Tones do not transmit

Last Updated: 09/06/2013
CTCSS or PL Tones do not transmit

This will happen if the cable is left connected to the radio and is NOT connected to the computer (it sets up a ground loop that causes this problem).

Solution, disconnect the cable from the radio when it's not in use.  

Note:  If using control software that requires the cable to be connected to the radio AND the computer, this is not a problem and everything works properly.  




Was this article helpful?

Comments:
 

Related Articles
 >
60 Meter Issue

 >
"y" Splitter

 >
60 Meters

 >
Banks or Memory Groups

 >
LTG Tuner/Cable

 >
Memories won't come up on the radio

 >
Radio won't go into CLONE mode

 >
Remote Mic (HM-59) not working properly

 >
Data Transfer Issue

 > Menu Item 86 - TX IF Filter
 >
FT-857/897 Shortcut Does Not Open Programmer and Icon Is Missing

 >
Banks in the FT-857