System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Toggle Channel Name / Frequency display

Last Updated: 08/28/2013
To toggle the Channel Name / Frequency display:

If the channel is on the left side.
Press and hold the [LOW] key on the "left" side of the radio for 1/2 second to switch the display between Alpha (Name) and Frequency.

If the channel is on the right side.
Press and hold the [LOW] key on the "right" side of the radio for 1/2 second to switch the display between Alpha (Name) and Frequency.

Also the P4 button (when set to Power) will toggle the Main band by press and hold for 1/2 second.


Was this article helpful?

Comments:
 

Related Articles
 >
A tone is heard by the receiving station at the beginning of each of my transmissions.

 >
Beep at the beginning of transmission

 >
Cannot Get from or Send to radio

 >
Clone Mode Center Button

 >
Loss of Audio

 >
Power Button

 >
Radio will not access start-up menu