System Requirements:
A PC running
Windows 7 (32 or 64 bit),
Windows 8 or 8.1 (full version), Windows 10.

Tech Support:
303-586-6510
Tech Support Hours:
Monday-Friday
8:00AM - 5:30PM
Mountain Time


Saturday
9:00AM - 1:00PM
Mountain Time
Email:
 
Sales:
Phone: 800-921-4834
Fax: 770-216-1836
Sales Hours:
Monday-Friday
8:00AM - 5:00PM
Mountain Time
Email Sales:
 
RT Systems
510 Compton St, #105
Broomfield, CO 80020
 
Join Our
Mailing List!

Enter your e-mail address
to receive programming
tips, promotions or
other information from
RT Systems.

 Visa MasterCard Discover and American Express


Knowledge Base:  
Buttons not working on radio

Last Updated: 08/09/2013
The IC-V8 and IC-V82, each have a channel number mode that not only displays Ch #, but renders many functions of the radio unaccessible from the radio's face.  

In this mode, it will appear that the radio has ceased to function properly.  

This is by design.  When in Channel Number mode, the radio is most like a commercial radio with limited features to be adjusted.  The radio could be handed to someone who knows nothing about it and used without fear of a setting begin changed and loss of communications.  

In the programmer, this mode is set in as Settings | Radio Memory Settings | Memory Display.  Set to Frequency / Memory Ch # / Name as needed for your use. 

From the face of the radio, this option is set from the Initial Set Menu.  To access the Initial Set Menu, hold the UP and Down arrow keys next to the display while turning on the power.  

The option dSP.[FR or CH or Na]  for FR - Frequency / CH - Channel Number / Na - Name  should be set appropriately for your use. 


Was this article helpful?

Comments:
 

Related Articles
 > Repeater Access Tones
 >

IC-2100 Narrow Band Operations


 >
Radio buttons not working

 >
No programmer for this radio

 >
Software and cable

 >
Memory Banks

 >
Software and Cables

 >
Software and Cables

 >
Dual Display

 >
Control Cable

 >
No programmer for this radio

 > Banks
 >
Cable Information

 >
Name Display

 >
Skip Channels

 >
Data Transfer

 >
Details for IC-756

 >
Port for Data/Programming Cable

 >
D-STAR Calculator not available

 >
Cable Requirements

 >
Banks - Accessing on the radio after programming

 >
D-STAR Settings & Calculator grayed out