FAQ 1 - Radio locked in Clone mode

Like I'll really keep up with the numbers...but No. 1 is easy.

When programming your VX-8, be sure the keys are not locked when you go into CLONE mode. If they are, you will not be able to complete the key sequence to communicate with the radio.

Now, this has always been a problem with Yaesu radios; but, this is the EASIEST to correct. No need to turn the radio off and back on...lots easier than that...read on.

Once the radio displays CLONE, look for the lock symbol(it's a little padlock). It will appear at the center bottom of the screen...it's really obvious since the only other thing on the screen is CLONE.

If it's there, touch the power button briefly...long enough to turn off the lock...but not long enough to turn off the radio.

The lock symbol disappears and you can continue with the next step in the programming process.