FAQ2 - Radio will not come back on after programming

Actually, the radio is on...it's just off in the woods.

This CAN BE CORRECTED BY YOU!!!

Remove the battery.

Hold the FW key while you replace the battery or apply external DC (connect the wall charger...seems easier than that battery).

The radio comes back on in CLONE mode.

Send a default file (File | New) to the radio. Do not send the same file back to the radio...that's where the problem lies.

Return to the file that you sent when the problem happened.

Access File | Send file as e-mail.

Type a message for us to come along with the file. We will work from there to isolate the exact combination of settings that resulted in the problem.

Let us know and we'll get the correction to you as quickly as possible.